Work-Arounds & Solutions for Connecting Phones to the Blocks Editor
This page may provide some help on troubleshooting connection problems between the
phone and Blocks editor. There are several different causes for these. We're
attempting to sort through the various symptoms, causes, and solutions. Thanks for
your patience and assistance while we're doing this.
Work-Arounds & Solutions
Here are a few of the issues we know about, with work-arounds. Most of these are
identified by looking at the Java console and what happens on the phone and in the
blocks editor. You can find instructions for how to view the Java console at bottom
of the documentation on
: After clicking
Connect To Phone
in the Blocks
Editor, the white Screen1 on the phone flashes and disappears, or you never see it
at all and the Blocks Editor tells you to plug in the phone. The Java console has a
message saying "Failed in setupSocket".
The most likely cause of this is that your phone is running
Android 1.5. (If not and these are your exact symptoms, please let us know).
Android 1.5 is not currently working with App Inventor
in connected phone. We're happy to report that we have a fix for this! Your Android
1.5 phones will work in connected mode the next time we update our App Inventor
servers (probably in a week or two). In the meantime, we recommend using the
emulator (make sure it is version 1.6 or higher) for connected development, and
then downloading your packaged apps to your phone.
Your phone is running version 1.6 or newer. After clicking
Connect To Phone
in the Blocks Editor, the white Screen1 appears
eventually, but the Blocks Editor tells you to plug in the phone and the Java
console has a message saying "Failed in setupSocket". This might happen every time
you try to connect, or just some of the time.
It looks like there is a timing issue where the app that
runs on the phone to connect to the blocks editor doesn't start up quickly enough
and the blocks editor gives up and assumes it cannot make the connection.
You can try stopping other apps on your phone that
might be slowing it down (e.g., sync services, Twitter, etc.) and then try
connecting to the blocks editor. If this works for you then you probably are
experiencing the timing problem mentioned above. We believe we have a fix for this
that will be available the next time we update the App Inventor servers (in a week
The Java console prints the message "adb-forward: Device
rejected command: cannot bind socket" and the blocks editor fails to connect to the
Most likely, some other application on your computer is
using port 9997.
You can usually use a command on your computer to find
out which applications might have the port open.
For Linux (and perhaps Mac?) open a shell (Terminal) window and type
lsof | grep 9997
to see the name and process id of the application that has port 9997 open.
On Windows, use the command
netstat -ao |find /i "9997"
At the end of the line is the process id (PID). Use the command
tasklist |find /i "PID"
If you stop the application that was using port 9997 then the blocks editor
should be able successfully run the "adb forward" command and, hopefully, connect
to your phone (assuming you don't also have one of the other problems mentioned
In the future we may allow the blocks editor to use ports other than 9997 to
connect to the phone, but it will probably not be possible in the next server
When you try to Connect to Phone the blocks editor tells
you to plug in a phone. The Java console contains the line: Device connected:
Your phone is not being recognized by the ADB (Android
Debug Bridge). This could be an issue with drivers or permissions.
The solution varies depending on the type of system
you are on and the type of phone you have. Search the App Inventor Forum and other
Android forums on the web to find advice for your particular system and phone. Many
people have posted fixes with pointers to drivers or instructions. You will know
that you have solved this particular problem when the command "adb devices" shows
you a device id that is a combination of letters and numbers. See the documentation
under "Testing and Debugging" for information on how to run the adb program.
You can connect to the phone but you are not seeing any of
your media on the phone (images, sounds). The Java console might have a message
like "ddms: transfer error: Permission denied" and
"yacodeblocks.AndroidControllerException: Failed to upload file". Or the Blocks
Editor migth give an error "Can't play the file meow.wav."
The phone's USB connection mode is set to the wrong option.
Pull down the screen notification panel (where the USB
icon should be showing), and press the "USB connected" button. The options shown
will depend on the phone model:
On the Nexus One, you'll see a button to "Turn on USB Storage" â€” don't select
On the Droid, you'll see four different options. Select the option for
"Windows Media Sync".